Pol-Eko – Walk-In Fume Hood, Dragskåp CompactLine DCL 1800

Beskrivning

Pol-Eko – Walk-In Fume Hood, Dragskåp CompactLine DCL 1800

Standard equipment for fume hoods:

– 2 x 230V 50Hz electrical sockets
– 2 x water taps with valves in the front panel
– ceramic sink 280x80mm
– illumination of the working chamber
– air-flow sensor (Schneider FM 550-A-0-E)
– window, opening upwards at 500 mm height (max 810 mm), additionally sliding glass (right/left)
– structure entirely made of galvanized steel without the use of wood-based materials
– toughened glass window, lifted manually with counterweight, opened upwards with a lock on height 500 mm (max 1850mm), additionally sliding windows (right / left). The window has a system preventing the uncontrolled fall of the window
– energy-saving linear LED lighting separated from the fume hood’s working chamber with a glass pane
– a double rear wall system with exhaust gaps in the upper and lower part ensuring the correct extraction of vapors that are lighter or heavier than air, without swirls and dead zones
– safety flap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber
– full monitoring set (Schneider brand) of air flow velocity in the fume cupboard window compliant with the PE-EN 14175 standard. : PN-EN 14175; PN-EN 14056; PN-EN 13150

Other optional equipment:

– main switch
– anti-shock switch
– safety switch
– 400VAC IP44 socket
– additional 230VAC IP44 sockets
– 230VAC sockets inside the working chamber IP44
– Manual Protect system – battery backup of the monitoring set
– power supply control of the socket with the option of timer setting
– additional gas taps
– metal cabinet key lock under the tabletop
– explosion-proof equipment EX
– side glazing
– truss made of acid-resistant steel, on the back wall of the manipulation chamber
– inspection openings
– flexible strip brush
– ventilated under bench cabinet made of steel covered by chemically resistant epoxy paint, connected to the ventilation system of fume hood, designed for short-term storage of reagents,
– under bench cabinet for acids and alkalis made of foamed PVC,
– fire resistant under bench cabinet,
– polypropylene trays,
– 230V sockets,
– gas connections,
– automatic windows,
– main switch with safety button,
– additional media: gas valves (technical gases and flammable gases), electrical sockets,
– explosion-proof equipment (illumination, electric sockets with plug adapters)
– glazed side walls 700×500 mm, made of tempered safety glass 4 mm
– grate on the back wall made of stainless steel
– elements of the fume hood made of stainless steel EN 1.4404 (construction, internal chamber, worktop, housing)
– possibility of placing safety cabinet under the fume hood instead of a standard cabinet

CONTROLLERS

FM 550

control functions with visual and sound
alarms in case of low air flow
(in accordance with PN-EN 14175)
sash window height alarm
airflow measurement [m³/h]
fume hood illumination control

iCM 500 F
microprocessor controller
for regulation and monitoring
of fume hood face velocity [m/s]
visual and sound alarm in case of emergency
control panel with fully graphic
and numerical LC-display
throttle with high-speed actuator

iCM 500 FP
microprocessor controller for regulation
and monitoring of face volumetric air flow
rate [m³/h]
visual and sound alarm in case of emergency
control panel with fully graphic and numerical LC-display
works with Building Management System (BMS)

Automatic Sash Controller SC 500
Infrared light barrier transmitter/receiver for registering objects during the closing proces.
Foot switch for opening the sash (option).

WORKING CHAMBER FINISHING

SS variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of steel, covered with chemically resistant epoxy paint.

CR variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of 8 mm Buchtal ceramic.

PP variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of polypropylene.

LM variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, iceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of Max Resistance phenolic resin composite.